【Parameters and type of large drying room】

1. Dimensions of the working chamber: Designed according to the dimension required by users;

2. Temperature parameters: Designed according to temperature range required by users,  temperature uniformity and other technical indicators; 

3. Structure types: Integral, combined or built-up; 

4. Mode of heating: By electric heating tube, heat transfer fluid, gas, steam or in a mixed way;

5. Heated air circulation mode: Choose heated air circulation mode in special air duct according to different places of the product to be dried, for instance, lower blower single circulation, top blower double circulation, blower back and forth circulation, etc.; 

6. Door open pattern of the drying room: Front, double, top or overhead;

7. Workpiece delivery method: By trolley, roller, chain, conveyor belt or push lever;

8. Trolley driving mode: Man-powered, self-powered, gear-rack drive, trailer wagon towed, winch drive or roller drive;

9. Mode of temperature control: By bit digital display instrument, time proportional temperature controller or intelligent (programmable) temperature controller;  

10.Power regulating mode: By contactor contact, silicon controlled contactless continuous or solid-state relay contactless switch;

11. Control method: Body controlled nearby, joined bodies controlled by segment, or controlled by independent control cabinet, centralized control room or computer based centralized control;

12. Observing device: Workpiece heating can be observed through headlamp in the operation chamber, sightglass on the door at any moment;

13. Various interfaces: For measuring workpiece parameters: Network communication interface,USB interface, 485/232 interface, interfaces for extracting air from workpiece, vacuumizing or casting workpiece, etc.

14. Special performance requirements: Explosion proofing, cleaning, and vacuum.